7 Jobs Where the Pavijet MG7E Makes More Sense Than a Full-Size Paver

A full-size asphalt paver is an incredible production machine – when the job gives it enough room to work.

But what happens when the paving area is narrow, surrounded by obstacles or too small to justify transporting a conventional paver?

That is where the Pavijet MG7E Super mini paver comes in.

The MG7E mounts to a skid steer, giving contractors a compact paving system that can reach areas conventional paving equipment cannot. More importantly, the “E” adds a major finishing advantage: an electrically heated screed with an integrated vibration system.

That means the MG7E is not simply designed to place asphalt in tight spaces. It is designed to help produce a smoother, more uniform finished surface once it gets there.

What Makes the “E” Different?

The “E” in MG7E identifies its electrically heated screed system.

Maintaining screed temperature helps prevent hot-mix asphalt from sticking to the screed and supports a cleaner, more consistent mat. The integrated vibration system further assists with uniform material placement and initial compaction.

The MG7E also offers:

• An adjustable paving width from approximately 12 to 78 inches
• Adjustable screed height and inclination
• Open and closed screed configurations
• Quick, intuitive adjustments
• A compact design for confined jobsites
• An optional 50-gallon emulsion tank and integrated spray system

The result is a skid-steer-mounted mini paver that combines access, adjustability and finish quality in one attachment.

1. Utility-Trench Restoration

Utility contractors regularly need to restore narrow sections of pavement following water, sewer, electrical or communications work.

These jobs are often too narrow for a conventional paver but too long to efficiently finish by hand.

The MG7E can pave directly over the repaired trench while its adjustable screed controls the required width. The electrically heated screed and integrated vibration system help produce a more uniform repair with fewer inconsistencies than completely manual placement.

2. Potholes and Localized Pavement Repairs

Small patches can consume a surprising amount of labor.

Crews must place the material, spread it, establish grade and create a smooth transition into the surrounding pavement. When every step is performed manually, consistency can vary from one repair to the next.

The compact MG7E gives contractors a mechanized option for localized repairs. Its adjustable screed can be configured for the repair area, while electric heat and vibration assist with smoother material flow and a more uniform finished surface.

3. Sidewalks, Walkways and Bike Paths

Sidewalks, pedestrian paths and bike trails frequently run through areas where a conventional paver cannot operate comfortably.

The MG7E’s compact footprint allows the skid steer to maneuver through these restricted areas while the screed can be adjusted for different paving widths.

This makes it well suited for:

• Asphalt sidewalks
• Bicycle paths
• Walking trails
• Park pathways
• Golf-cart paths
• Recreational surfaces

The electrically heated screed becomes especially valuable on projects where appearance and surface consistency matter just as much as access.

4. Road Widening and Shoulder Work

Widening an existing road or constructing a narrow shoulder does not always require a full-size paving machine.

The MG7E allows contractors to pave a controlled strip alongside an existing roadway. Its adjustable screed width provides flexibility for different shoulder dimensions, while screed heat and vibration help create a consistent mat along the edge of the existing pavement.

For smaller widening projects, this can reduce the amount of specialized paving equipment that must be transported to the site.

5. Parking Lots, Driveways and Private Roads

Not every parking-lot or driveway project offers wide-open access.

Curbs, islands, loading areas, gates and existing structures can create sections that are difficult to reach with conventional paving equipment.

The MG7E can be used for narrow lanes, perimeter work, driveway sections and other confined areas. It also gives contractors a practical paving option for smaller projects where bringing a full-size paver may not make economic sense.

[EMBED VIDEO: “PAVE WHERE OTHERS CAN’T”]

6. Paving Around Fixed Obstacles

Signposts, trees, utility poles, guardrails, drainage structures and landscaped islands can force paving crews into slow, labor-intensive handwork.

The MG7E’s flexible screed configuration helps crews work around these fixed obstacles while maintaining greater control over the paving width and finished surface.

Instead of treating every obstacle as a separate hand-paving operation, contractors can keep more of the work mechanized.

7. Urban and Confined-Space Paving

Downtown streets, courtyards, alleys and municipal work zones often provide very little room for paving equipment.

The MG7E combines the maneuverability of a skid steer with the capabilities of a compact asphalt paver. This makes it particularly useful for projects where access, transportation and setup time are just as important as paving production.

Its electric screed heating and integrated vibration system add the finishing capabilities needed to do more than simply place material in these difficult locations.

Small Footprint. Serious Paving Capability.

The value of the Pavijet MG7E is not simply that it is smaller than a conventional paver.

Its value comes from combining:

• The maneuverability of a skid steer
• An adjustable paving width
• An electrically heated screed
• An integrated vibration system
• Compact transportation and setup
• The ability to pave where larger equipment cannot operate

For contractors, municipalities and utility crews, the MG7E can turn work that was previously slow and labor-intensive into a more controlled and repeatable paving process.

Pave Where Others Can’t

If your crews are still hand-paving trenches, pathways, shoulders and confined repair areas, it may be time to look at what the Pavijet MG7E Super can add to your operation.

Contact Hitek Equipment to discuss the MG7E, skid-steer compatibility, available options and whether it is the right fit for your paving applications.

Call: 262-842-1700
Email: info@askhitek.com